Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

Advances in polymerase chain reaction (PCR) have permitted accurate, rapid and quantitative identification of microorganisms in pure cultures regardless of viability or culturability. In this study, a simple sample processing method was investigated for rapid identification and quantification of fungal spores from dust samples using both conventional and real-time PCR. The proposed method was evaluated for susceptibility to interference from environmental dust samples. Stachybotrys chartarum and Aspergillus fumigatus were used as test organisms. The sensitivity of detection in pure culture was 0.1 spore DNA equivalents per PCR reaction corresponding to 20 spores ml(-1) in the sample. However, 1 spore DNA equivalent per PCR reaction corresponding to 200 spores ml(-1) in the sample was the lowest amount of spores tested without interference in dust samples spiked with spores of either fungal species. The extent of inhibition was calculated using conventional and real-time PCR reactions containing fungal spores, specific primers, specific probes (for real-time PCR) and various amounts of dust. The results indicate that the extent of inhibition by dust on PCR varies with the type and amount of dust, and number of spores. No interference in the analysis of spiked samples was detected from 0.2 mg ml(-1) of four real-life dust samples at p-value >0.05 using 2 x 10(4) spores for conventional PCR and 2 x 10(5) spores for real-time PCR. However, samples containing >0.2 mg ml(-1) real-life dust compromised the PCR assay. These results suggest the potential usefulness of a simple sample processing method in conjunction with PCR for monitoring the fungal content of aerosols collected from indoor environments.     

中国土壤中溴,碘的背景含量

通过对全国八百余个表层土样的分析测试,获得了中国土壤中溴、碘背景含量的总体水平及在各土类中的含量,相对于地壳丰度,中国土壤中溴、碘普遍得到了富集,溴、碘含量分异变化较大,并具有明显的地域分异特征,影响中国土壤中溴、碘含量的主要因素是降水量、土壤吸附体的含量以及某些特殊母质。     

浅析生态园林城市的建设--以重庆市为例

随着社会、经济的快速发展，城市生态环境问题越来越突出，由此人们提出了建设生态园林城市的构想，即实现了人与自然、人与社会的和谐统一，实现了可持续发展的人类聚居地。山水园林城市与生态城市在本质上是一致的。本文以重庆市为例，从自然、经济、社会三个生态亚系统入手，分析了重庆市生态系统的现状，主要是提出目前面临的问题和矛盾，并在此基础上提出重庆市建设山水园林城市的5条途径。     

用液相催化法和脱硫除尘器脱除烟气中SO_2

在由旋风水膜和两块旋流塔板组成的处理气量为７５０ｍ￣３／ｈ的二级脱硫除尘器中，进行了用含催化剂Ｍｎ￣（２＋）的水溶液吸收ＳＯ_２的扩大试验。结果表明，在确定的条件下，脱硫率达到７３％，板效率为０．２５～０．２８。在同一设备中同时完成除尘与脱硫过程，设备投资少；以水为吸收剂，运行费用低；中性条件下吸收，长期运转不结垢，可靠性高。     

中国黄土元素背景值分异规律研究

报道了中国黄土中40个元素的背景值,并以F、Cr、Mn、Co、Ni、V、Cu、Zn、As、Se、Cd、Pb、Hg等13个元素为例,讨论了其在黄土高原的分布与含量。利用趋势面分析等数理统计方法,揭示了黄土中元素的某些环境地球化学特征及元素背景值的分异规律。结果表明,黄土的元素背景值具有三维的分异特征,黄土的质地及沉积的生物气候环境黄土是影响背景值分异的主要因素。为中国黄土的风成学说提供了佐证。     

Heavy metals in water bodies purified by suspended substrate of rivers

ＩｎｔｒｏｄｕｃｔｉｏｎＨｅａｖｙｍｅｔａｌｓｉｎｗａｔｅｒｂｏｄｉｅｓａｒｅｓｉｇｎｉｆｉｃａｎｔｌｙｄｉｆｆｅｒｅｎｔｆｒｏｍｏｒｇａｎｉｃｐｏｌｌｕｔａｎｔｓｔｈａｔｃａｎｂｅｍｉｃｒｏｂｉｏｌｏｇｉｃａｌｌｙｄｅｇｒａｄｅｄｏｒｄｅｃｏｍｐｏｓｅｄ .Ｇｅｎｅｒａｌｌｙ ,ｔｈｅｙａｒｅｐｕｒｉｆｉｅｄｔｈｒｏｕｇｈｔｈｅｉｒａｄｓｏｒｐｔｉｏｎｏｎｔｏｓｕｓｐｅｎｄｅｄｓｕｂｓｔｒａｔｅｓｉｎｒｉｖｅｒｓ.Ａｄｓｏｒｐｔｉｏｎｏｆｈｅａｖｙｍｅｔａｌｓｏｎｒｉｖｅｒｓｕｓｐｅｎｄｅｄｓｕｂ…     

曲面零件在拉深过程中内皱时刻及影响因素

进一步推导了曲面零件悬空区上的应力分布及临界失稳公式。然后通过计算机编程 ,求解了临界失稳方程 ,得到了拉深系数、相对锥顶半径、相对圆角半径、材料相对厚度与临界失稳时刻间的关系曲线 ,并对曲线变化的规律进行了分析。     

GHG emission reductions and costs to achieve Kyoto target

Emission projection and marginal abatement cost curves (MACs) are the central components of any assessment of future carbonmarket, such as CDM (clean development mechanism) potentials, carbon quota price etc. However, they are products of very complex,dynamic systems driven by forces like population growth, economic development, resource endowments, technology progress and so on. The modeling approaches for emission projection and MACs evaluation were summarized, and some major models and their results were compared.Accordingly, reduction and cost requirements to achieve the Kyoto target were estimated. It is concluded that Annex I Parties‘ total reduction requirements range from 503--1304 MtC with USA participation and decrease significantly to 140--612 MtC after USA‘ s withdrawal. Total costs vary from 21--77 BUSD with USA and from 5--36 BUSD without USA if only domestic reduction actions are taken. The costs would sharply reduce while considering the three flexible mechanisms defined in the Kyoto Protocol with domestic actions‘ share in the all mitigation strategies drons to only 0--16%.     

Kinetics of continuous biodegradation of pesticide organic wastewater by activated carbon-activated sludge

１ＩｎｔｒｏｄｕｃｔｉｏｎＮｏｖｅｌｂｉｏｌｏｇｉｃａｌａｃｔｉｖａｔｅｄｃａｒｂｏｎａｎｄａｃｔｉｖａｔｅｄｓｌｕｄｇｅｓｙｓｔｅｍｈａｓｓｈｏｗｎｉｔｓｅｆｅｃｔｉｖｅａｂｉｌｉｔｙｔｏｒｅｄｕｃｅＣＯＤｉｎｔｏｘｉｃｏｒｇａｎｉｃｗａｓｔｅｗａ...